i have a iwata bcs brush and a craftsman 3 gallon 1 hp compressor im running a craftsman water trap and the air hose that came with the airbrush off of that i think its a 10 ft hose and its pulsing is there something im doing wrong and how do i fix it and do u need to thin createx colors for shirts
That happens often if you don’t clean your airbrush time to time. You need to thoroughly take your brush apart and clean each part really good even if it takes an hour. You can use the cleaning solution as a lubricant so it will work smoothly and without major friction inside the brush.
It might also be that the opaque colors are a little more thicker, especially opaque white. They do sell an additive that you can add to your paint so it will flow smoother through the brush. If you don’t want to spend money on that you can just add a little water to thin it out, but it doesn’t mix as well as the additive even though Createx is all water based.
DuraCoat Firearm Finishing Intro by Nutnfancy
[affmage source=”ebay” results=”15″]Airbrush Hose[/affmage] [affmage source=”amazon” results=”10″]Airbrush Hose[/affmage] [affmage source=”cj” results=”5″]Airbrush Hose[/affmage] [affmage source=”clickbank” results=”5″]Airbrush Hose[/affmage]